For Better Performance Please Use Chrome or Firefox Web Browser

ISI Papers

2017

1) Kangazian J, Shamanian M, Ashrafi A. Dissimilar welding between SAF 2507 stainless steel and Incoloy 825 Ni-based alloy: The role of microstructure on corrosion behavior of the weld metals. Journal of Manufacturing Processes. 2017;29:376-88.

2) Sadeghi, B., Shamanian, M., Cavaliere, P., Ashrafizadeh, F., Sanayei, M. and Szpunar, J.A., 2017. Microstructural and mechanical behavior of bimodal reinforced Al-based composites produced by spark plasma sintering and FSP. The International Journal of Advanced Manufacturing Technology, pp.1-14.

3) Foroughi, A., M. Shamanian, M. Kasiri-Asgarani, and J. Kangazian. "Investigations on Dissimilar Weld of UNS S32205 DSS and ASTM A517 Steel." Transactions of the Indian Institute of Metals: 1-12.

4) Rafiei, Mahdi, Morteza Shamanian, Hossein Mostaan, and Mehdi Salehi. "Tribological properties of B4C–TiB2–TiC–Ni cermet coating produced by HVOF." International Journal of Materials Research 108, no. 8 (2017): 681-687.

5) Morteza Shamanian, Hossein Mostaan, Mehdi Safari, Jerzy A. Szpunar, Friction stir modification of GTA 7075-T6 Al alloy weld joints: EBSD study and microstructural evolutions, a r c h i v e s o f c i v i l a n d m e c h a n i c a l e n g i n e e r i n g 1 7 ( 2 0 1 7 ) 5 7 4 – 5 8 5

6) Sadeghi, B., M. Shamanian, F. Ashrafizadeh, P. Cavaliere, and A. Rizzo. "Influence of Al2O3 Nanoparticles on Microstructure and Strengthening Mechanism of Al-Based Nanocomposites Produced via Spark Plasma Sintering." Journal of Materials Engineering and Performance 26, no. 6 (2017): 2928-2936.

7) Soltani, M., M. Shamanian, and B. Niroumand. "Structure and Properties of “Magnesium Alloy–Carbon Nanotubes” Nanocomposite and their Optimization Using Design of Experiments." Metal Science and Heat Treatment 59, no. 3-4 (2017): 255-261.

8) Kangazian, Jalal, Navid Sayyar, and Morteza Shamanian. "Influence of Microstructural Features on the Mechanical Behavior of Incoloy 825 Welds." Metallography, Microstructure, and Analysis 6, no. 3 (2017): 190-199.

9) Rajaei, Vahid, Hamed Rashtchi, Keyvan Raeissi, and Morteza Shamanian. "The study of Ni-based nano-crystalline and amorphous alloy coatings on AISI 304 stainless steel for PEM fuel cell bipolar plate application." International Journal of Hydrogen Energy 42, no. 20 (2017): 14264-14278.

10) Khodadadi, Ali, Morteza Shamanian, and Fathallah Karimzadeh. "Microstructure and Mechanical Properties of Dissimilar Friction Stir Spot Welding Between St37 Steel and 304 Stainless Steel." Journal of Materials Engineering and Performance (2017): 1-12.

11) Sattari, Behnoosh, Morteza Shamanian, Ali Ashrafi, Mehdi Salehi, and Farshid Salimijazi. "Effect of number of passes on the corrosion behavior of Fe/Al surface composites produced by plasma spraying and friction stir processing." Journal of Materials Processing Technology 250 (2017): 35-44.

12) Norouzi, Ehsan, Morteza Shamanian, Masoud Atapour, and Babak Khosravi. "Diffusion brazing of Ti–6Al–4V and AISI 304: an EBSD study and mechanical properties." Journal of Materials Science 52, no. 20 (2017): 12467-12475.

13) Pakmanesh, Mohammad Reza, and M. Shamanian. "Effects of Process Parameters on the Tensile-Shear Strength of Pulsed Laser Welded Thin 316L Stainless Steel Foils." Transactions of the Indian Institute of Metals: 1-10.

14) Janbozorgi, M., M. Shamanian, M. Sadeghian, and P. Sepehrinia. "Improving tribological behavior of friction stir processed A413/SiC p surface composite using MoS 2 lubricant particles." Transactions of Nonferrous Metals Society of China 27, no. 2 (2017): 298-304.

15) Kangazian, Jalal, and Morteza Shamanian. "Mechanical and microstructural evaluation of SAF 2507 and incoloy 825 dissimilar welds." Journal of Manufacturing Processes 26 (2017): 407-418.

16) Ashrafi, H., Shamanian, M., Emadi, R., & Saeidi, N. (2017). Microstructure, Tensile Properties and Work Hardening Behavior of GTA-Welded Dual-Phase Steels. Journal of Materials Engineering and Performance, 26(3), 1414-1423.

17) H. Ashrafi, M. Shamanian, R. Emadi, N. Saeidi, A novel and simple technique for development of dual phase steels with excellent ductility, Materials Science & Engineering A 680 (2017) 197–202.

18) Ehsan Norouzi, Masoud Atapour, Morteza Shamanian, Effect of bonding time on the joint properties of transient liquid phase bonding between Ti–6Al–4V and AISI 304, Journal of Alloys and Compounds 701 (2017) 335-341.

19) SAEED HASANI, MORTEZA SHAMANIAN, ALI SHAFYEI, MAJID NEZAKAT, HOSSEIN MOSTAAN, and JERZY A. SZPUNAR, Effect of Recrystallization and Phase Transitions on the Mechanical Properties of Semihard Magnetic FeCo-7.15V Alloy During the Thermomechanical Process, METALLURGICAL AND MATERIALS TRANSACTIONS A, DOI: 10.1007/s11661-017-3954-8.

20) H. Ashrafi, M. Shamanian, R. Emadi, N. Saeidi, Examination of phase transformation kinetics during step quenching of dual phase steels, Materials Chemistry and Physics 187 (2017) 203-217.

21) Abdolvand, M. Atapour, M. Shamanian, A. Allafchian, The effect of bonding time on the microstructure and mechanicalproperties of transient liquid phase bonding between SAF 2507 andAISI 304R., Journal of Manufacturing Processes 25 (2017) 172–180.

22) M. Shiraly,  M. Shamanian , M. R. Toroghinejad,  M. Ahmadi Jazani, S. Sadreddini, The Influence of Tool Geometry on the Mechanical Behaviour of FSSWed Al/Cu ARBed Composite, Trans Indian Inst Met, DOI 10.1007/s12666-017-1044-7.

2016

23) H. Rashtchi, K. Raeissi, M. Shamanian, Y. Acevedo Gomez, C. Lagergren, R. Wreland Lindstrom, V. Rajaei, Evaluation ofNi-Mo andNi-Mo-P Electroplated Coatings on Stainless Steel, for PEM Fuel Cells Bipolar Plates, FUEL CELLS 16, 2016, No. 6, 784–800.

24) Mohsen Hajian Foroushani, Morteza Shamanian, Mehdi Salehi, Fatemeh Davar, Porosity analysis and oxidation behavior of plasma sprayed YSZ and YSZ/LaPO4 abradable thermal barrier coatings, CeramicsInternational42(2016)15868–15875.

25) Hamid Ashrafi, Sorour Sadeghzade, Rahmatollah Emadi, Morteza Shamanian, Influence of Heat Treatment Schedule on the Tensile Properties and Wear Behavior of Dual Phase Steels, Steel Research International,  DOI: 10.1002/srin.201600213.

26) H. Ashrafi, M. Shamanian, R. Emadi, N. Saeidi , Correlation of Tensile Properties and Strain Hardening Behavior with Martensite Volume Fraction in Dual-Phase Steels, Transactions of the Indian Institute of Metals; doi:10.1007/s12666-016-0955-z .

27) Hossein Mostaan,  Morteza Shamanian,  Saeed Hasani , Jerzy A. Szpunar, A Study on Nd:YAG Laser Micro-Welding of Ultra-Thin FeCo-V Magnetic Alloy: Optimization of Weld Strength, Transactions of Nonferrous Metals Society of China.

28) Saeed Hasani, Morteza Shamanian , Ali Shafyei , H. Mostaan , Jerzy A. Szpunar, Effect of recrystallization and phase transitions on the mechanical properties of semi-hard magnetic FeCo-7.15V alloy during thermomechanical process, Metallurgical and Materials Transactions A,

29) Morteza  Shamanian, Hossein Mostaan, Mehdi Safari, Jerzy A Szpunar, EBSD study on grain boundary and microtexture evolutions during friction stir processing of A413 cast Aluminum alloy, Journal of Materials Engineering and Performance, (2016) 25:2824–2835.

30) M. Hajihashemi, M. Shamanian and B. Niroumand, Microstructure and mechanical properties of Al-6061-T6 alloy welded by a new hybrid FSW/SSW joining process, Science and Technology of Welding and Joining, 21 (2016) 493-503.

31) H. Shah Hosseini, M. Shamanian, A. Kermanpur, Microstructural and weldability analysis of Inconel617/AISI 310 stainless steel dissimilar welds, International Journal of Pressure Vessels and Piping 144 (2016) 18-24

32) J. Kangazian, M. Shamanian,  Multiresponse Optimization of Pulsed-Current Gas Tungsten Arc Welding (PCGTAW) for AISI 304 Stainless Steel to St 52 Steel Dissimilar Welds, Metallogr. Microstruct. Anal. (2016) 5:241–250.

33) R. Neissi, M. Shamanian, , M. Hajihashemi, The Effect of Constant and Pulsed Current Gas Tungsten Arc Welding on Joint Properties of 2205 Duplex Stainless Steel to 316L Austenitic Stainless Steel, Journal of Materials Engineering and Performance,  Vol.25, pp 2017-2028, 2016.

34) Rouholah Ashiri, Morteza Shamanian, Hamid Reza Salimijazi, Md Anwarul Haque, Jin-Hee Bae, Chang-Wook Ji, Kwang-Geun Chin, Yeong-Do Park, Liquid metal embrittlement-free welds of Zn-coated twinning induced plasticity steels, Scripta Materialia 114 (2016) 41–47.

35) M. Mostafaei, M. Shamanian, H. Purmohamad, and M. Amin, Increasing Weldability of Service-Aged Reformer Tubes by Partial Solution Annealing, Journal of Materials Engineering and Performance (2016) 25:1291–1303

36) Ehsan Norouzi, Masoud Atapour, Morteza Shamanian, Alireza Allafchian, Effect of bonding temperature on the microstructure and mechanical properties of Ti-6Al-4V to AISI 304 transient liquid phase bonded joint, Materials and Design 99 (2016) 543–551.

37) Hossein Mostaan, Morteza Shamanian, Mehdi Safari, Process analysis and optimization for fracture stress of electronbeam welded ultra-thin FeCo-V foils, Int J Adv Manuf Technol, DOI 10.1007/s00170-016-8553-0.

38) Monireh Kouhi, Morteza Shamanian, Mohammad Hossein Fathi, Ali Samadikuchaksarai andAhmad Mehdipour, Synthesis, Characterization, In Vitro Bioactivity and Biocompatibility Evaluation of Hydroxyapatite/Bredigite (Ca7MgSi4O16) Composite Nanoparticles, JOM, Vol. 68, No. 4, pp. 1061-1070, 2016.

2015

39) H. Mostaan, M. Shamanian, S. Hasani, and J. A. Szpunar, Response of structural and magnetic properties of ultra-thin FeCo–V foils to high-energy beam welding processes, International Journal of Minerals, Metallurgy and Materials, (2015) 22:1190-1198.

40) Mostafa Tahari, Morteza shamanian, Mehdi salehi, The effect of heat treatment and thermal spray processes on the grain growth of nanostructured composite CoNiCrAlY/YSZ powders, Journal of Alloys and Compounds 646 (2015) 372-379.

41) Rouholah Ashiri, Morteza shamanian, Hamid Reza Salimijazi, Md Anwarul Haque, Chang-Wook Ji, , Yeong-Do Park,  Supercritical area and critical nugget diameter for liquid metal embrittlement of Zn-coated twining induced plasticity steels, Scripta Materialia 109 (2015) 6–10.

42) S. Hasani, M. Shamanian, A. Shafyei, P. Behjati, H. Mostaan, P. Sahu, J.A. Szpunar, Electron microscopy study on grain boundary characterizations of FeeCoeV alloy during annealing, , Vacuum 114 (2015) 1-5.

43) Morteza Shamanian, Mahyar Mohammadnezhad, Mahdi Amini, Azam Zabolian, and Jerzy A. Szpunar,  Electron Backscatter Diffraction Analysis of Joints Between AISI 316L Austenitic/UNS S32750 Dual-Phase Stainless Steel, Journal of Materials Engineering and Performance, (2015) 24:3118–3128.

44) Mahyar Mohammadnezhad, Morteza Shamanian, Azam Zabolian, Mahshid Taheri, Vahid Javaheri, Amir Hossein Navidpour, Majid Nezakat, Jerzy A. Szpunar,  Microstructure and Crystallographic Texture Variations in the Friction-Stir-Welded Al-Al2O3-B4C Metal Matrix Composite Produced by Accumulative Roll Bonding, METALLURGICAL AND MATERIALS TRANSACTIONS A, (2015) 46 A: 5747-5755.

45) Mohammad Hosein Bina, Mostafa Jamali, Morteza Shamanian, Hamed Sabet, Effect of Welding Time in the Resistance Spot Welded Dissimilar Stainless Steels, Trans Indian Inst Met (2015) 68(2):247–255.

46) Saeed Hasani, Ali Shafyei, Morteza Shamanian, Peiman Behjati, Hossein Mostaan, Timu Juuti, Jerzy A. Szpunar, Correlation Between Magnetic Properties and Allotropic Phase, Transition of Fe–Co–V Alloy, Acta Metall. Sin. (Engl. Lett.), DOI 10.1007/s40195-015-0294-9.

47) Abbas Eghlimi, Keyvan Raeissi,  Morteza Shamanian, Tribocorrosion Behavior of Overlay Welded Super Duplex Stainless Steel in Chloride Medium, J Bio Tribo Corros (2015) 1:18.

48) Abbas Eghlimi, Morteza Shamanian, Masoomeh Eskandarian, Azam, Zabolian, Jerzy A. Szpunar, Characterization of Microstructure and Texture across Dissimilar Super Duplex / Austenitic Stainless Steel Weldment Joint by Austenitic Filler Metal, Materials Characterization 106 (2015) 208–217.

49) Abbas Eghlimi, Morteza Shamanian, Masoomeh Eskandarian, AzamZabolian, Jerzy A. Szpunar, Characterization of microstructure and texture across dissimilar super duplex/austenitic stainless steel weldment joint by super duplex filler metal, Materials Characterization 106 (2015) 27–35.

50) M. Zarezadeh Mehrizi, M. Shamanian, A. Saidi, R. Shoja-Razazvi, R. Beigi, Evaluation of oxidation behavior of laser clad CoWSi-WSi2 coating on pure Ni substrate at different temperatures, Ceramics International, 41(2015) 9715-9721.

51) Shohreh Fattahpour, Morteza Shamanian, Naser Tavakoli, Mohammad Hossein Fathi, Saeid Reza Sheykhi, Shirin Fattahpour, Design and optimization of alginate-chitosan-pluronic nanoparticles as a novel meloxicam drug delivery system, J. APPL. POLYM. SCI. 2015, DOI: 10.1002/APP.42241.

52) Morteza Shamanian, Abbas Eghlimi, Masoomeh Eskandarian, Jerzy A. Szpunar, Interface microstructure across cladding of super duplex stainless steel with austenitic stainless steel buffer layer, Surface & Coatings Technology 259 (2014) 532–542.

53) Abbas Eghlimi,Morteza Shamanian, Masoomeh Eskandarian,Azam Zabolian, Majid Nezakat, Jerzy A. Szpunar, Evaluation of Microstructure and Texture across the Welded Interface of Super Duplex Stainless Steel and High Strength Low Alloy Steel, Surface & Coatings Technology 264 (2015) 150–162

54) M.H. Razmpoosh, M. Shamanian, M. Esmailzadeh, The microstructural evolution and mechanical properties of resistance spot welded Fe–31Mn–3Al–3Si TWIP steel, Materials and Design 67 (2015) 571–576. 

55) Mahdi Hajihashemi, Behzad Niroumand and Morteza Shamanian, The Effect of Process Parameters on the Microstructure and Mechanical Properties of Semisolid Cast Al6061, Metallurgical and Materials Transactions B,  46B(2015) 780-792.

56) Hossein Mostaan, Morteza Shamanian, Seyed Mahmoud Monirvaghefi, Peiman Behjati, Jerzy A. Szpunar, Morteza Amiri, Mashallah Fathi Moghadam Structure, Texture and Magnetic Properties of Laser-Welded Ultrathin Fe–Co–V Foils, Acta Metall. Sin. (Engl. Lett.), 2015, 28(3), 338–347.

57) Mahdi Hajihashemi, Morteza Shamanian and Ghasem Azimi, Physical, Mechanical, and Dry Sliding Wear Properties of Fe-Cr-W-C Hardfacing Alloys Under Different Tungsten Addition, Metallurgical and Materials Transactions B,  46B(2015) 919-927.

58) S. Hasani, M. Shamanian, A. Shafye, P. Behjati, H. Mostaan, P. Sahu, J.A. Szpunar, Electron microscopy study on grain boundary characterizations of Fe-Co-V alloy during annealing,  Vacuum 114 (2015) 1-5.

59) H. Mostaan, M.Shamanian, S.M.Monirvaghefi, P.Behjati, S.Hasan, M. Fathi Moghaddam, M.Amiri, J.A.Szpunar, Analysis and characterization of microstructural evolutions, mechanical response and fracture emechanism of laser welded Fe–Co–V ultra-thin foils, Optics & LaserTechnology 68(2015)211–219. 

60) Milad Ashrafzadeh, Amir Peyman Soleymani, Masoud Panjepour, Morteza Shamanian, Cementite Formation from Hematite–Graphite Mixture by Simultaneous Thermal–Mechanical Activation, Metallurgical and Materials Transactions B,  46B (2015) 813-823.

61) S. Hasani, M.Shamanian, A.Shafyei, P.Behjati, M.Nezakat, M.Fathi-Moghaddam, J.A.Szpunar , Influence of annealing treatment on micro/macro-texture and texture dependent magnetic properties in cold rolled FeCo–7.15 Valloy, Journal of Magnetism and Magnetic Materials378(2015) 253–260.

62) Damoon Sohrabi Baba Heidary, Farhad Madadi, Morteza Shamanian, Study of the MicrosFtructures and Abrasive Characteristics of Mo-Fe-C Hardfacing Alloys Fabricated by Gas Tungsten Arc Welding, Tribology Transactions, 58: 225-230, 2

2014

63) S. Hasani, M. Shamanian, A. Shafyei, P. Behjati, J.A. Szpunar,  Non-isothermal kinetic analysis on the phase transformations of Fe-Co-V alloy, Thermochimica Acta, 596(2014) 89-97.

64)  Hasani, M. Shamanian, A. Shafyei, P. Behjati, J.A. Szpunar, M. Fathi-Moghaddam, Nano/sub-micron crystallization of Fe–Co–7.15V alloy bythermo-mechanical process to improve magnetic properties, Materials Science and Engineering B 190 (2014) 96–103

65) Morteza Shamanian, Mahyar Mohammadnezhad, Hamed Asgari, Jerzy Szpunar, Fabrication and Characterization ofAl-Al2O3-ZrC Composite Produced by Accumulative Roll Bonding (ARB) Process, Journal of Alloys and Compounds, 618 (2015), 19-26.

66) Mohammad Hosein Bina, Mostafa Jamali, Morteza Shamanian, Hamed Sabet, Investigation on the resistance spot-welded austenitic/ferritic stainless steel, Int J Adv Manuf Technol (2014) 75:1371–1379.

67) M. Yarahmadi, M. Shamanian, H. R. Salimi Jazi and H. R. Hoshyarmanesh,Transient liquid phase diffusion bonding of Al/Al2O3 nanostructured metal matrix composites, Science and Technology of Welding and Joining  19 (2014), 603-608.

68) M. Rafiei; M. Shamanian; M. Salehi; A. Motallebzadeh, Improvement in oxidation behaviour of steel by B4C–TiB2–TiC–Ni coating, Surface Engineering, Surface Engineering 30(2014), 791-795.

69) H. Mostaan, M. Shamanian, S.M. Monirvaghefi, P. Behjati, J.A. Szpunar, J. Sherafati, Electron beam assisted joining of nanograin-sized FeeCoeV magnetic foils: Study and optimization of magnetic properties of weld joints, Vacuum 109 (2014) 148-156.

70) M. Rafiei, M. Salehi, M. Shamanian, Formation mechanism of B4C–TiB2–TiC ceramic composite by mechanical alloying of Ti–B4C powders, Advanced Powder Technology 25(2014) 1754-1760.

71) Mahdi Hajihashemi, Behzad Niroumand and Morteza Shamanian, Microstructural and Statistical Study of Semisolid Casting of 6061 Alloy Using a Miniature Cooling Slope, Metallurgical and Materials Transaction, 45B(2014), 1804-1816.

72) Hamid Montazerolghaem, Mohsen Badrossamay, Alireza Fadaie Tehrani, Saeed Ziaie Rad, Morteza Shamanian Esfahani, Dual-Rotation Speed Friction Stir Welding: Experimentation and Modeling, Materials and Manufacturing Processes, 0: 1–6, 2015.

73) Mehdi Rahmani, Abbas Eghlimi, Morteza Shamanian,Evaluation of Microstructure and Mechanical Properties in Dissimilar Austenitic / Super Duplex Stainless Steel Joint, Journal of Materials Engineering and Performance, 23 (2014) 3745–3753.

74) Morteza Shamanian, Mahyar Mohammadnezhad, and Jerzy Szpunar, Production of High-Strength Al/Al2O3/WC Composite by Accumulative Roll Bonding, Journal of Materials Engineering and Performance, 23 (2014) 3152-3158.

75) Morteza Shamanian, Mahyar Mohammadnezhad, Jerzy Szpunar, Texture analysis of a friction stir welded ultrafine grained Al-Al2O3 composite produced by accumulative roll-bonding, Journal of Alloys and Compounds, Journal of Alloys and Compounds 615 (2014) 651–656.

76) H. Mostaan, M. Shamanian, S.M. Monirvaghefi, P. Behjati, J.A. Szpunar, Magnetic properties assessment of laser welded ultra-thin Fe-Co-V foils, Journal of Alloys and Compounds, 615 (2014) 56–64.

77) M. Sabbaghian, M. Shamanian, H.R. Akramifard, M. Esmailzadeh, Effect of friction stir processing on the microstructure and mechanical properties of Cu–TiC composite, Ceramics International, Ceramics International 40 (2014) 12969–12976.

78) M. Rafiei, M. Salehi, M. Shamanian, A. Motallebzadeh, Preparation and oxidation behavior of B4C–Ni and B4C–TiB2–TiC–Ni composite coatings produced by an HVOF process,  Ceramics International, Ceramics International 40(2014) 13599–13609.

79) M. Zarezadeh Mehrizi, M.Shamanian, A.Saidi, R.Shoja Razavi,  Laser cladding of CoWSi/WSi2 on Ni substrate and evaluation of its high temperature oxidation behavior, Ceramics International, Ceramics International 40 (2014) 13447–13452

80) M. Sadeghian, M. Shamanian, A. Shafyei, Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel, Materials and Design 60 (2014) 678–684.

81) M. Lotfollahi, M. Shamanian, A. Saatchi, Effect of friction stir processing on erosion–corrosion behave ior of nickel–aluminum bronze, Materials and Design 62 (2014) 282–287.

82) M. Zarezadeh Mehrizi,  M. Shamanian, A. Saidi, CoWSi/WSi2 Nanocomposite Produced by Mechanical Alloying, Trans Indian Inst Met (2014) 67(5):709–714.

83) A. Mortezaie, M. Shamanian,  An assessment of microstructure, mechanical properties and corrosion resistance of dissimilar welds between Inconel 718 and 310S austenitic stainless steel, International Journal of Pressure Vessels and Piping, 116 (2014) , pp.37-46

84) Eghlimi, A., Shamanian, M., Raeissi, K., Effect of current type on microstructure and corrosion resistance of super duplex stainless steel claddings produced by the gas tungsten arc welding process, Surface and Coatings Technology, 244 (2014) pp. 45-51.

85) Zarezadeh Mehrizi, M., Shamanian, M., Saidi, A., Synthesis of CoWSi-WSi2 nanocomposite by mechanical alloying and subsequent heat treatment, Ceramics International 40 (2014) 9493–9498.

86) Askari-Paykani, M., Shayan, M., Shamanian, M., Weldability of ferritic ductile cast iron using full factorial design of experiment, Journal of Iron and Steel Research International, 21 (2014), pp. 252-263

87) M. Shiraly, M. Shamanian, M.R. Toroghinejad, and M. Ahmadi Jazani, Effect of Tool Rotation Rate on Microstructure and Mechanical Behavior of Friction Stir Spot-Welded Al/Cu Composite, Journal of Materials Engineering and Performance, 23(2014), pp.413-420

88) M. Zarezadeh Mehrizi, M. Shamanian, and A. Saidi, Characterization and Synthesis of Co(ss)/WSi2-CoWSi Nanocomposite by Mechanical Alloying and Subsequent Sintering, Journal of Materials Engineering and Performance, 23 (2014), 451-457.

89) S. Hasani, M. Panjepour, M. Shamanian, Non-Isothermal Kinetic Analysis of Oxidation of Pure Aluminum Powder Particles, Oxid Met (2014) 81:299–313.

90) H.R. Akramifard, M. Shamanian, M. Sabbaghian, M. Esmailzadeh, Microstructure and mechanical properties of Cu/SiC metal matrix composite fabricated via friction stir processing, Materials and Design, 54 (2014) 838-844.

91) R. Arabi Jeshvaghani, M. Jaberzadeh, H. Zohdi, M. Shamanian, Microstructural study and wear behavior of ductile iron surface alloyed by Inconel 617, Materials and Design 54 (2014) 491–497.

92) M. Mohammadnezhad, M. Shamanian, M.H. Enayati, M. Salehi, A. Hoseynian, Microstructures and properties of NiAl–TiC nanocomposite coatings on carbon steel surfaces produced by mechanical alloying technique, Surface & Coatings Technology 238 (2014) 180–187.

2013

93) Abbas Eghlimi, Morteza Shamanian, and Keyvan Raeissi, Dilution and Ferrite Number Prediction in Pulsed Current Cladding of Super-Duplex Stainless Steel Using RSM, Journal of Materials Engineering and Performance,  22 (2013), pp. 3657-3664

94) M. Mohammadnezhad, V. Javaheri, M. Shamanian, M. Naseri, M. Bahrami, Effects of vanadium addition on microstructure, mechanical properties and wear resistance of Ni-Hard4 white cast iron, Materials and Design 49 (2013) 888–893.

95) I. Hajiannia, M. Shamanian, M. Kasiri, Microstructure and mechanical properties of AISI 347 stainless steel/A335 low alloy steel dissimilar joint produced by gas tungsten arc welding, Materials and Design 50 (2013) 566–573.

96) A.R. Safari, M.R. Forouzan, M. Shamanian, Thermo-viscoplastic constitutive equation of austenitic stainless steel 310s, Computational Materials Science 68 (2013) 402–407.

97) M. Mohammadnezhad, M. Shamanian, M.H. Enayati, Influence of annealing temperature on the structure and properties of the nanograined NiAl intermetallic coatings produced by using mechanical alloying, Surface & Coatings Technology 217 (2013) 64–69.

98) M. Esmailzadeh, M. Shamanian, A. Kermanpur, T. Saeid, Microstructure and mechanical properties of friction stir welded lean duplex stainless steel, Materials Science & Engineering A,  561 (2013) 486–491.

2012 and before

99) M. Mohammadnezhad, M. Shamanian, M.H. Enayati, Formation of nanostructured NiAl coating on carbon steel by using mechanical alloying, Applied Surface Science 263 (2012) 730–736.

100) M. Izadinia, M. Shamanian, H. Mohammadi, H. Keyvanlou, A. R. Nouri,  Improvement in the Environmental Resistance to Oxidation and Surface Properties of Simple Carbon Steel Using Aluminum Coating, Transction of the  Indian Institute of Metals,  65(2012):497–502

101) E. Rastkerdar, M. Shamanian, and A. Saatchi,”Taguchi Optimization of Pulsed Current GTA Welding Parameters for Improved Corrosion Resistance of 5083 Aluminum Welds”, Journal of Materials Engineering and Performance, (2013) 22:1149–1160.

102) M. Yousefieh, M. Shamanian, A. R. Arghavan, Analysis of Design of Experiments Methodology for Optimization of Pulsed Current GTAW Process Parameters for Ultimate Tensile Strength of UNS S32760 Welds, Metallography, Microstructure and Analysis, (2012) 1:85–91.

103) A.R. Safari, M.R. Forouzan, M. Shamanian, “Hot cracking in stainless steel 310s, numerical study and experimental verification”, Computational Materials Science 63 (2012) 182–190.

104) Amirhossein Molladavoudi, Sajjad Amirkhanlou, M. Shamanian, Fakhreddin Ashrafizadeh,  “The production of nanocrystalline cobalt titanide intermetallic compound via mechanical alloying”, Intermetallics 29 (2012) 104-109.

105) S. Hasani, M. Panjepour,  M. Shamanian, “Kinetic analysis of oxidation of pure aluminum powder under non-isothermal condition”, Propellants, Explosives, Pyrotechnics, 2012.

106) M. Tahari, M. Shamanian, M. Salehi, “Microstructural and morphological evaluation of MCrAlY/YSZ composite produced by mechanical alloying method”, Journal of Alloys and Compounds 525 (2012) 44– 52.

107)  M. Yousefieh, M. Shamanian, and A. Saatchi, “Optimization of Experimental Conditions of the PulsedCurrent GTAW Parameters for Mechanical Properties of SDSS UNS S32760 Welds Based on the TaguchiDesign Method”, Journal of Materials Engineering and Performance, 2012, 21: 1978-1988..

108) Gh. Azimi, M. Shamanian, P. Firozi, Microstructure and wear properties of Fe-Cr-C and Fe-Cr-Nb-C clads on carbon steel by TIG surfacing process, Int. J. Surface Science and Engineering, 6 (2012), 15-23.

109) S. Hasani, M. Panjepour,  M. Shamanian, “The Oxidation Mechanism of Pure Aluminum Powder Particles”, Oxidation of Metals, DOI 10.1007/s11085-012-9299-1.

110) Amirhossein Molladavoudi, Sajjad Amirkhanlou, Morteza Shamanian, Fakhreddin Ashrafizadeh, “Synthesis and characterization of nanocrystalline CoTi intermetallic compound prepared by mechanical alloying”, Materials Letters, 81 ( 2012) 254–257.

111) A.R. Safari,M.R. Forouzan, M. Shamanian, “Modeling of fusion zone in FE analysis of the welding process”, Journal of Advanced Research in Mechanical Engineering, l.2(2011) 18-26.

112) A. Esmaeili, H.R. Zareie Rajani, M. Sharbati, M.K. Besharati Givi, M. Shamanian, The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple , Intermetallics 19 (2011) 1711-1719.

113) S. Hasani, M. Panjepour, M. Shamanian, Effect of atmosphere and heating rate on mechanism of MoSi2 formation during self-propagating high-temperature synthesis, J Therm Anal Calorim (2012) 107:1073–1081.

114) A.R Abbasi, M. Shamanian, “Synthesis of α-Mo-Mo5SiB2-Mo3Si nanocomposite powders by two-step mechanical alloying and subsequent heat treatment”, Journal of Alloys and Compounds, 509(2011) 8097-8104.

115) M. Yousefieh, M. Shamanian, A. Saatchi, The Influence of Heat Input in the Pulsed Current GTAW Process on Microstructure and Corrosion Resistance of Duplex Stainless Steel Welds, Journal of Iron and Steel Research International, 18 (2011) 65-69.

116) F. Madadi, M. Shamanian, F. Ashrafizadeh, " Effect of pulse current on microstructure and wear resistance of Stellite6/tungsten carbide claddings produced by tungsten inert gas process", Surface & Coatings Technology 205 (2011) 4320–4328.

117) A. Gholipour, M. Shamanian, F. Ashrafizadeh, "Microstructure and wear behavior of satellite 6 cladding on 17-4 PH stainless steel", Journal of Alloys and Compounds, 509 (2011) 4905-4909.

118) H. Shah hosseini, M. Shamanian, A. Kermanpur, "Characterization of Microstructures and Mechanical Properties of Inconel 617/310 Stainless Steel Dissimilar Welds", Materials Characterization, 62 (2011) 425-431.

119) R. Arabi Jeshvaghani, M. Shamanian, M. Jaberzadeh, “Enhancement of wear resistance of ductile iron surface alloyed by stellite 6”, Materials and Design, 32 (2011) 2028-2033.

120) M. Yousefieh, M. Shamanian, and A. Saatchi, Influence of Step Annealing Temperature on the Microstructure and Pitting Corrosion Resistance of SDSS UNS S32760 Welds, Journal of Materials Engineering and Performance, 20 (2011) 1678-1683.

121) A.R Abbasi, M. Shamanian, Synthesis of Mo5SiB2-based nanocomposites by mechanical alloying and subsequent heat treatment, Materials Science and Engineering A, 528 (2011) 3295-3301.

122) M. Yousefieh, M. Shamanian, A. Saatchi, Optimization of the pulsed current gas tungsten arc welding (PCGTAW) parameters for corrosion resistance of super duplex stainless steel (UNS S32760) welds using the Taguchi method, Journal of Alloys and Compounds, 509 (2011) 782-788.

123) M. Atapour, A. Pilchak, M. Shamanian  and M.H. Fathi “Corrosion behavior of Ti-8Al-1Mo-1V alloy compared to Ti-6Al-4V", Materials and Design, 32 (2011) 1692-1696.

124) R. Arabi Jeshvaghani, E. Harati, M. Shamanian, “Effects of surface alloying on microstructure and wear behavior of ductile iron surface-modified with a nickel-based alloy using shielded metal arc welding”, Materials and Design, 32 (2011) 1531-1536.

125) F. Madadi, F. Ashrafizadeh,  M. Shamanian," Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM, Journal of Alloys and Compounds 510 (2012) 71– 77.

126) A. Esmaeili, H.R. Zareie Rajani, M. Sharbati, M.K. Besharati Givi, M. Shamanian, “The role of rotation speed on intermetallic compounds formation and mechanical behavior of friction stir welded brass/aluminum 1050 couple”, Intermetallics 19 (2011) 1711-1719.

127) H. Shah Hosseini, M. Alishahi, M. Shamanian, "Zonular evaluation of Inconel 617/310 SS dissimilar joint by shear punch test", Materials Letters 67 (2012) 259–262.

128) M. Shamanian, S.M.R. Mousavi Abarghouie, S.R. Mousavi Pour, “Effects of surface alloying on microstructure and wear behavior of ductile iron", Materials and Design, 31(2010) 2760-2766.

129) H. Naffakh, M. Shamanian, F. Ashrafizadeh, “Microstructural evolutions in dissimilar welds between AISI 310 austenitic stainless steel and Inconel 657", Journal of Materials Science, 45(2010) 2564-2573.

130) G. Azimi, M.Shamanian, “Effect of silicon content on the microstructure and properties of Fe–Cr–C hardfacing alloys", Journal of Materials Science, 45(2010) 842-849.

131) H. Purmohamad, A. Kermanpur and M. Shamanian, "Numerical Simulation and Experimental Investigation of Residual Stresses in the Circumferential Butt GTAW of Incoloy 800H Pipes", Journal of Materials Engineering and Performance, 19(2010) 13-21.

132) M.H. Amushahi, F. Ashrafizadeh, M. Shamanian, “Characterization of Boride Rich Hardfacing on Carbon Steel by Arc Spray and GMAW Processes", Journal of Surface and Coating Technology, 204(2010) 2723-728.

133) G. Azimi, M. Shamanian, “Microstrcture and Corrosion Behavior of Fe-Cr-C and Fe-Cr-Si-C Clads on Crabon Steel by TIG Surfacing Process", Advances Materials Research, 83-86(2010) 1035-1042.

134) M. Atapour, A. Pilchak, G.S. Frankel, J.C. Williams, M.H. Fathi, and M. Shamanian, “Corrosion Behavior of Ti-6Al-4V with Different Thermomechanical Treatments and Microstructures", Corrosion, 66(2010) 065004 to1-065004-9.

135) H. Purmohamad, A. Kermanpur and M. Shamanian, “Numerical Simulation and Experimental Investigation of Temperature Distribution in the Circumferentially Butt GTAW of Incoloy 800H Pipes”, International Journal of Pressure Vessels and Piping, 87 (2010) 424-432.

136) S. Hasani, M. Panjepour, M. Shamanian, “A study of the effect of aluminum on MoSi2 formation by self-propagation high-temperature synthesis”, Journal of Alloys and Compounds, 502 (2010) 80-86.

137) Y. Salehi Yegaie, A. Kermanpur , M. Shamanian, “Numerical simulation and experimental investigation of temperature and residual stresses in GTAW with a heat sink process of Monel 400 plates”, Journal of Materials Processing Technology, 210 (2010), 1690-1701.

138) M. Zarezadeh Mehrizi, A. Saidi, M. Shamanian, H. R. Eslami, “Combustion synthesis of Fe-Al/TiC composite powders and effect of Al content on its characteristics”, Powder Metallurgy,  54(2011) 400-403-

139) M. Zarezadeh Mehrizi, A. Saidi, M. Shamanian, “Fe3Al/TiC nanocomposite produced by mechanical alloying”, Powder Metallurgy, 54(2011) 408-411.

140) G. Azimi, M. Shamanian, “Effects of Silicon Content on the Microstructure and Corrosion Behavior of Fe-Cr-C Hardfacing alloys”, Journal of Alloys and Compounds, 505 (2010) 598-603.

141) M. Zarezadeh Mehrizi, A. Saidi, M. Shamanian, “Production of Fe3Al–TiC nanocomposite by mechanical alloying of FeTi2–Al–C powders”, Materials Science and Technology, 27 (2011) 1465-1468.

142) M. Zarezadeh Mehrizi, A. Saidi, M. Shamanian, “Combustion Synthesis of Fe3Al/ TiC Composite Powders”, Powder Metallurgy, 54(2011) 518-521.

143) M. Atapour, M.H. Fathi, and M. Shamanian, “Corrosion Behavior of Ti-6Al-4V Alloy Weldment in Hydrochloric Acid" Materials and Corrosion, 63 (2012) 134-139.

144) A.R Abbasi, M. Shamanian, “Characterization of in-situ α-Mo/Mo5SiB2 nanocomposite produced by mechanical alloying”, Journal of Alloys and Compounds, 508 (2010) 152–157.

145) M. Mostafaei, M. Shamanian, H. Purmohamad, M. Amini, A. Saatchi, “Microstructural degradation of two cast heat resistant reformer tubes after long term service exposure”, Engineering Failure Analysis, 18 (2011) 164-171.

146) A.Azadmehr, A. Saidi, M. Shamanian,"Investigation of Possible Usage of Electric Arc Furnace Dust in Cement Industry”, International Journal of ISSI, 6(2009) 9-13.

147) F. Madadi, M. Shamanian, F.Ashrafizadeh, " Cladding of Stellite composite on carbon steel by gas tungsten arc welding (GTAW)”, International Journal of ISSI, 6(2009) 34-37.

148) M. Mostafaei M. Shamanian, A. Saatchi, H. Purmohamad, M. Amini, S. M. Mir, A. Shirani, J.Ezadi, “Effect of aging temperature on structural evolution of HP-Nb heat resistant steel”, International Journal of ISSI, 6(2009) 30-33. 

149) R. Tahmasebi, M. Shamanian, M. Panjepour and M.H. Abbasi " Effect of Iron on Mechanical Activation and Structural Evolution of Hematite-Graphite Mixture", Journal of Alloys and Compounds, 472(2009) 334-342.

150) H. Naffakh, M. Shamanian, F.Ashrafizadeh, " Dissimilar Welding of AISI 310 Austenitic Stainless Steel to Nickel-based Alloy Inconel 657", Journal of Materials Processing and Technology, 209(2009) 3628-3639.

151) M. Samadi, M. Shamanian, A. Saidi, M.H. Abbasi, M. Panjepour and F. Asgharzadeh Javid, "The Effect of Mo Particle Size on SHS Synthesis Mechanism of MoSi2", Journal of Alloys and Compounds, 475(2009) 529-534.

152) R. Dehmolaei, M. Shamanian and A. Kermanpur, " Microstructural Changes and Mechanical Properties of Incoloy 800 after 15 Years Service", Materials Characterization, 60(2009) 246-250.

153) A. Kermanpur, M. Shamanian and V. Esfahani Yeganeh, "Three-dimensional Thermal Simulation and Experimental Investigation of GTAW Circumferentially Butt-welded Incoloy 800 Pipes", Journal of Materials Processing Technology, 199(2008) 295-303.

154) M. Samadi, M. Shamanian, M. Panjepour, A. Saidi, M.H. Abbasi and F. Asgharzadeh Javid, "Investigation of MoSi2 Formation in the Presence of Copper by Self-propagating High-temperature Synthesis", Journal of Alloys and Compounds, 46(2008) 229-234.

155) R. Dehmolaei, M. Shamanian and A. Kermanpur, "Microstructural Characterization of Dissimilar Welds between Alloy 800 and HP Heat Resistant Steel ", Materials Characterization, 59(2008) 1447-1454.

156) F. Asgharzadeh Javid , M.H. Abbasi, A. Saidi, M. Shamanian, and, M. Samadi , "Formation Mechanism of MoSi2 in the Presence of Copper by Combustion   Synthesis: A Study in Thermal Explosion Mode", Powder Metallurgy, Powder Metallurgy, 51(2008) 263-267. 

157) R. Dehmolaei, M. Shamanian and A. Kermanpur, "Effect of Electromagnetic Vibration on the Unmixed Zone Formation in 25Cr-35Ni Heat Resistant Steel/Alloy 800 Dissimilar Welds", Materials Characterization, 59(2008) 1814-1817.

158) R. Dehmolaei, M. Shamanian and A. Kermanpur, "Effect of solution annealing on weldability of aged alloy 800/25Cr–35Ni steel dissimilar welds", Science and Technology of Welding and Joining, Vol.13, No.6, pp.515-523, 2008.

159) H. Naffakh, M. Shamanian, F.Ashrafizadeh, " Influence of Artificial Aging on Microstructure and Mechanical Properties of Dissimilar Welds between 310 Stainless Steel and Inconel 657", Metallurgical and Materials Transaction A, 39(2008) 2403-2415.

160) H. Naffakh, M. Shamanian, F.Ashrafizadeh, " Weldability in Dissimilar Welds between type 310 Austenitic Stainless Steel and Alloy 657", Journal of Materials Science, 43(2008) 5300-5304.

161) R. Dehmolaei, M. Shamanian and A. Kermanpur, " Factors Effecting Weldability Improvement of Dissimilar Welds between Aged HP Steel and Alloy 800", International Journal of ISSI, 5(2008) 15-21.

162) H. Naffakh, M. Shamanian, F.Ashrafizadeh, "Interface and Heat-affected Zone Features of Dissimilar Welds between AISI 310 Austenitic Stainless Steel and Inconel 657", International Journal of ISSI, 5(2008) 22-30.

163) H. Naffakh, M. Shamanian, F.Ashrafizadeh, " An Evaluation of Thermal Stability in Dissimilar Welds between 310 Stainless Steel and Alloy 657", Iranian Journal of Materials Science and Engineering, 5(2008) 8-18.

164) R. Dehmolaei, M. Shamanian and A. Kermanpur, "Improving Weldability of Aged       25Cr–35Ni Heat Resistant Steel/alloy 800 Dissimilar Welds", Science and Technology of Welding and Joining, 12(2007) 586-592.

165) H. Naffakh, M. Shamanian, F.Ashrafizadeh, " A Comparative Evaluation of Welding Consumables for Dissimilar Welds between 310 Austenitic Stainless Steel and Inconel 657", International Journal of ISSI, 4(2007) 39-49.

166) A. Bahrami. S.H. Mousavi Andijdan, M.A. Golozar, M. Shamanian, N. Varahram, "Effect of  Conventional Heat Treatment on Wear Resistant of AISI H13 Tool Steel", Wear 258 (2005) 846–851.

167) M. Shamanian and A. Najafi-Zadeh, "Hot Charge of Continuously Cast Slabs in Reheating Furnace", International Journal of ISSI, 1(2004) 35-37.

168) A. Saidi, M. Shamanian, M. Barati and K.Azari, "Hyper Activation of Bentonite in Pelletizing Process", International Journal of ISSI, 1(2004) 38-41.

169) M.Shamanian, M. Salehi, A. Saatchi, T. H. North, "Influence of Ni Interlayers on Mechanical Properties of Ti6Al4V/(WC-Co) Frichtion Welds", Materials and Manufacturing Processes, 19(2003) 581-598.

170) M.Salehi, M.shamaian and F.Ashrofizadeh. "Development of Ni-Al and Ni-Al-Fe Intermetallic Coatings on Carbon Toll Steels", Surface Engineering, 13(1997) 505-508.

 

 

تحت نظارت وف ایرانی